Research Articles

Peer-Reviewed Journal

Published during  April 2019 onwards

    .

  1. Swathy Sadala, Saikat Dutta, Radhika Raghava, TS Sasi Jyothsna, B Chakradhar and Sadhan Kumar Ghosh, Resource recovery as alternative fuel and raw material from hazardous waste. Special Issue of 9th IconSWM 2019: WM&R,Vol 37, Issue 11, 2019; page(s): 1063-1076; https://doi.org/10.1177/0734242X19854124.

    2. Published during  April 2018 – June 2018

      .

    1. Sadhan Kumar Ghosh, P. Agamuthu, (2018). Circular economy: The way forward, Editorial, Waste Management & Research 2018, Vol. 36(6) 481-482;DOI: 10.1177/0734242X18778444 journals.sagepub.com/home/wmr.
    2. Ipsita Saha, Amit Kundu, Sadhan Kumar Ghosh “Organizational Perspective of Critical Success factor to establish ERP as a Sustainable Solution”, The Journal of Army Institute of Management Kolkata, Kindler Volume XVII January – June 2018, PP 150–156.
    3. Baidya, R., Ghosh, S. K., & Parlikar, U. V. (2018). Blast furnace flue dust co-processing in cement kiln–A pilot study. Waste Management & Research, 0734242X18816791.
    4. Baidya, R., & Ghosh, S. K. (2018). Low carbon cements manufacturing in India by co-processing of alternative fuel and raw materials. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-12.
    5. Ghosh, A., Debnath, B., Ghosh, S. K., Das, B. and Sarkar, J. P., 2018. Sustainability analysis of organic fraction of municipal solid waste conversion techniques for efficient resource recovery in India through case studies. Journal of Material Cycles and Waste Management, pp.1-17.
    6. De, D., Chowdhury, S., Dey. P., & Ghosh, S., (2018), Impact of Lean and Sustainability Oriented Innovation on Sustainability Performance of Small and Medium Sied Enterprises : A data Envelopment Framework, International Journal of Production Economics. . DOI: 10.1016/j.ijpe.2018.07.003.
    7. Debnath, B., Chowdhury, R., Ghosh, S. K. (December 2018). Sustainability of metal recovery from e-waste. Frontiers in Environmental Science and Engineering, 12(6):2. (DOI: 10.1007/s11783-018-1044-9) [Topical Collection: Special Issue—Recycling Materials from WEEE] (Impact Factor: 1.961).

      8. 2017-18

      1. Francesco Di Maria, Federico Sisani, Stefano Contini, Sadhan K. Ghosh, (2018). Impact of different schemes for treating landfill leachate, Waste Management 71 (2018) 255–266.
      2. Ghosh, A., Debnath, B., Ghosh, S. K., Das, B., & Sarkar, J. P. (2018). Sustainability analysis of organic fraction of municipal solid waste conversion techniques for efficient resource recovery in India through case studies. Journal of Material Cycles and Waste Management, 1-17. (Impact Factor: 1.604).
      3. Dasgupta, Raktim & Mukhopadhyay, Arup & Ghosh, Sadhan. (2017). Reduction of lead time through curtailment of cycle time of a supplier-a case example. International Journal of Engineering Trends and Technology. Vol. 54. 233-251. 10.14445/22315381/IJETT-V54P233.
      4. Debnath, B., Chowdhury, R., Ghosh, S. K. (2018). Sustainability of metal recovery from e-waste. Frontiers in Environmental Science and Engineering, 12(6):2. (DOI: 11007/s11783-018-1044-9) (Impact Factor: 1.716) [Online publication awaited].
      5. Baidya, R., Ghosh, S. K. , & Parlikar, U. V. (2017). Sustainability of cement kiln co-processing of wastes in India: a pilot study. Environmental Technology, 2017 Feb 28: 1-10,.doi: 10.1080/09593330.2017.1293738.

        6. Baidya, R., Ghosh, S. K. , Parlikar, U., (2017), Co-Processing of Marble Slurry In Indian Cement Plant, 4th 3R International Scientific Conference on Material Cycles and Waste Management New Delhi, India.

      2016-17

      1. Ghosh, S. K., Debnath, B., Baidya, R., De, D., Li, J., Ghosh, S. K., Zheng, L., Awasthi, A.K., Liubarskaia, M.A., Ogola, J.S. & Tavares, A. N. (2016). Waste electrical and electronic equipment management and Basel Convention compliance in Brazil, Russia, India, China and South Africa (BRICS) nations. Waste Management & Research, 34(8), 693-707. (Impact Factor: 1.9) (Editor’s Choice Paper for August 2016).
      2. Amit K. Chattopadhyay, Prasanta K. Dey, Sadhan K. Ghosh, (2017). Dynamics of spatial heterogeneity in a landfill with interacting phase densities – A stochastic analysis, International Journal of Applied Mathematical Modelling. Applied Mathematical Modelling, https://doi.org/10.1016/j.apm.2016.08.026; Volume 41,  January 2017, Pages 350-358.
      3. Baidya, R., Ghosh, S.K., Parlikar, U.V, (2017), Sustainability of Cement Kiln Co-Processing of Wastes in India: A Pilot Study, Environmental Technology, 1-10. DOI: http://dx.doi.org/10.1080/09593330.2017.1293738.
      4. Rahul Baidya, PrasantaDey, Sadhan Ghosh, Konstantinos Petridis, (2016). Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach, IntJournal ofAdv Manufacturing Technology, DOI 10.1007/s00170-016-9540-1.(2016).
      5. Asit Aich, Sadhan Kumar Ghosh, (2016). Organic fraction of municipal solid waste – a valuable source of green energy in India , International Journal of Energy Sector Management, Vol. 10 No. 4, 2016, p. 000 © Emerald Group Publishing Limited, 1750-6220, DOI 10.1108/IJESM-06-2015-0001, ISSN: 1750-6220.
      6. Debnath B., Chowdhury., R., Ghosh S. K., “Sustainability of Metal Recovery from E-waste.”Frontiers of Environmental Science and Engineering (Impact Factor: 1.799)
      7. Baidya, R., Dey, P. K., Ghosh, S. K.,& Petridis, K. (2016). Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach. The International Journal of Advanced Manufacturing Technology, 1-14. DOI: 10.1007/s00170-016-9540-1
      8. Baidya, R., Ghosh, S. K.,&Parlikar, U. V. (2016). Co-processing of industrial waste in Cement Kiln–A Robust system for material and energy recovery. Procedia Environmental Sciences, 31, 309-317, DOI: https://doi.org/10.1016/j.proenv.2016.02.041
      9. Baidya, R., Debnath, B., De, D., &Ghosh, S. K. (2016). Sustainability of modern scientific waste compacting stations in the city of Kolkata. Procedia Environmental Sciences, 31, 520-529, DOI: https://doi.org/10.1016/j.proenv.2016.02.072
      10. Parlikar, U., Bundela, P. S., Baidya, R., Ghosh, S. K., Ghosh, S. K. (2016). Effect of Variation in the Chemical Constituents of Wastes on the Co-processing Performance of the Cement Kilns. Procedia Environmental Sciences, 35, 506-512. DOI: https://doi.org/10.1016/j.proenv.2016.07.035
      11. Baidya, R., Ghosh, S. K. (2016). Utilization of Discarded Waste in a Composting Plant for Energy Recovery by Plasma Gasification-a Proposed Model. Journal of Solid Waste Technology & Management, 42(1), 806-813.
      12. Baidya, R., Ghosh, S. K. (2016). Plasma Gasification Technology for Energy Recovery from Waste. Journal of Solid Waste Technology & Management, 42(1), 794-805.

      2015-16

      1. Debnath B., Baidya R., Ghosh S.K., “Simultaneous Analysis of WEEE management System Focusing on the supply chain in India, UK and Switzerland”, International Journal of Manufacturing & Industrial Engineering, Volume 2, Issue 1, pg. 16 – 20. Publication date: 30th April, 2015. http://www.seekdl.org/nm.php?id=5602

      2014-15

      1. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2015), Productivity Improvement by Reduction of Idle Time through Application of Queuing Theory accepted for publication at OPSEARCH, 52, Issue-2, pp 195-211.
      2. De, D., Ghosh S. K., (2014); Implementation and value creation of green productivity by green supply chain management, International Journal of Manufacturing & Industrial Engineering, Volume 2: Issue 1, ISSN: 2374-1589.
      3. Debnath, B., Baidya, R., Ghosh, S. K., (2014), Simultaneous Analysis of WEEE Management System Focusing on the supply chain in India, UK and Switzerland, International Journal of Manufacturing & Industrial Engineering, Volume 2: Issue 1, ISSN: 2374-1589.
      4. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), Developing a Model for Process Improvement Using Multiple Regression Technique: A Case Example in ‘The TQM Journal’. Vol. 26, Issue-6, pp 625-638
      5. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), Measurement System Analysis for implementing design for six sigma in International Journal of Productivity and Quality management, Vol. 14, Issue-3, pp 373-386.
      6. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), An outline of the ‘Control Phase’ for implementing Lean Six Sigma accepted in the International Journal of Lean Six Sigma, Vol. 5, Issue-3, pp 230-252.

      2013-14

      1. JD Nixon, PK Dey, S K Ghosh, PA Davies, (2013) Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process, Energy, Volume 59, Pages 215-223, Publisher Pergamon, publication date 2013/9/15.
      2. JD Nixon, DG Wright, P K Dey, S K Ghosh, PA Davies, (2013) A comparative assessment of waste incinerators in the UK, Journal of Waste Management, Elsevier, Vol. 33, Issue 11, Pages 2234-2244, Publisher Pergamo, publication date 2013/11/30.
      3. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2013) “Root cause analysis, Lean Six Sigma and test of hypothesis”, The TQM Journal, Vol. 25 Issue: 2, pp.170-185, https://doi.org/10.1108/17542731311299609.
      4. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2013) “Improvement of claim processing cycle time through Lean Six Sigma methodology”, International Journal of Lean Six Sigma, Vol. 4 Issue: 2, pp.171-183, https://doi.org/10.1108/20401461311319347.

      2012-13  

      1. Roy, T. K, Mukhopadhyay, Arup, Ghosh, Sadhan, Majumdar, Gautam. (2013). Estimation of Noise of a Moving Passenger Car. Indian Journal of Environmental Protection. 33(6), January 2013..
      2. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2012), Forecasting Daily Workflow Volumes for Medical Transcription Process, IAPQR Transaction, Vol 37, No 2, 2012, pp 83-102

      2010-11

      1. Sadhan Kumar Ghosh, Sannidhya Kumar Ghosh (2011). Rebuilding C&D Waste Recycling Efforts in India, Waste Management World, September 2011 issue, Volume 12, Issue 5.
      2. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2011), Improvement of Service Quality by Reducing Waiting Time for Service, Journal of Simulation Modelling Theory and Practice, Elsevier, Vol 19, Issue 7, (2011) P 1689-1698.
      3. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2011) “Selection of critical processes for “process improvement””, International Journal of Lean Six Sigma, Vol. 2 Issue: 4, pp.356-370, https://doi.org/10.1108/20401461111189434
      4. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2011), Comparison of Performance Appraisal Scores among Different Functions, Research and Practice in Human Resource Management, Vol 2, 2011, pp 92-100.
      5. Chaudhuri, Debaprayag & Mukhopadhyay, Arup & Ghosh, Sadhan. (2011). Assessment of engineering colleges through application of the Six Sigma metrics in a State of India. International Journal of Quality & Reliability Management. 28. 969-1001. 10.1108/02656711111172540.

      2010-2009

      1. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2010), Issues in Pareto Analysis and its resolution, TQM and Business Excellence, Vol 24, 2011, No. 5-6, pp641-651.
      2. Roy, T. K, & Mukhopadhyay, Arup & Ghosh, Sadhan & Majumdar, Gautam. (2010). Honking -Its Influence on Noise Pollution. Indian Journal of Environmental Protection, 30(8), 653-658, ISSN :0253-7141.