Books as Editor

Edited volume /Int. Journal as Chief Editor / Editor / Associate Editor by Prof Sadhan K Ghosh

PUBLISHED:

  1. Editor: Waste Management as Economic Industry Towards Circular Economy, DOI: 10.1007/978-981-15-1620-7, published in March 2020,Springer Nature Publication;ISBN 978-981-15-0532-4;
  2. Editor:Urban Mining and Sustainable Waste Management, https://www.springer.com/gp/book/9789811505317,published in March 2020,Springer Nature Publication;ISBN: 978-981-15-1620-7;
  3. Editor: Circular Economy : Global Perspective, 2019, contribution from 21 countries on Circular Economy, published in November 2019,Springer Nature Publication;
  4. Chief Editor : Proceedings of 8th IconSWM 2018 Two Volumes, in November 2018.
  5. Associate Editor, Special issue of International Journal of Materials Cycle and Waste Management, Member Technical Committee of 4th 3RINCs, April 2018.
  6. “Waste Management and Resource Efficiency”, published in January 2019, Springer Nature Publication.
  7. Sustainable waste management: Policies & Case Studies : published in January 2019, Springer Nature Publication.
  8. Waste Water Recycling and Management: Published in June 2018, ISBN 978-981-13-2619-6, Springer Nature Publication.
  9. Energy Recovery Processes from Wastes, Theme based book, ISBN 978-981-329-228-4, Springer Nature, © 2020.
  10. Waste Valorisation and Recycling Technology : Published in June 2018, Springer Publication. Volume 2, ISBN 978-981-13-2784-1, © 2019.
  11. Urban Mining and Sustainable Waste Management, Theme based book by Springer Nature, under publication, ISBN 978-981-15-0532-4, © 2020.
  12. Bio-resource Utilization and Bioprocess, ISBN 978-981-15-1607-8, book by Springer Nature,
  13. Editor of the Book, “Waste Management and Resource Efficiency”, Proceedings of 6thIconSWM 2016, Sept 2018; Springer Publication,ISBN 978-981-10-7290-1;
  14. Editor of the book volume : Sustainable waste management: Policies & Case Studies : Proceedings of 7th IconSWM 2017, published in Dec 2018, Springer Publication.
  15. Associate Editor for WM&R (SAGE) June 2018 edition : International Journal of Materials Cycle and Waste Management, Member Technical Committee of 4th 3RINCs.
  16. Editor: ElsevierProcedia Environmental Sciences, “Waste Management & Resource Utilisation” published in August 2016 –Proceedings of 5thIconSWM, ISWMAW; http://www.sciencedirect.com/science/journal/18780296/35.
  17. Associate Editor of Special Issue (Springer) : International Joural of Materials Cycle and Waste Management, Member Technical Committee of  4th 3RINCs, due in end 2018.
  18. Chief Editor: “Waste Management & Resource Utilisation” the Proceedings of 6thInternational Conference on Solid Waste Management, ISWMAW, November 2016.
  19. Utilization and Management of Bioresources : Proceedings of 6th IconSWM 2016, Published in October 2017, Springer Publication, ISBN 978-981-10-5349-8; https://www.springer.com/la/book/9789811053481.
  20. Chief Editor :“Waste Management & Resource Utilisation” – Edited the Proceedings of 5thInternational Conference on Solid Waste Management, Oxford Publishing House, in 2015 published in November 2015 at IISc Bangalore.
  21. Chief Editor: Proceedings of 3rd International Conference on Solid Waste Management, Oxford Publishing House, 2012.
  22. Chief Editor: Proceedings of 2nd International Conference on Solid Waste Management, Oxford Publishing House, 2011
  23. Editor: Management Systems –Proceedings of 6th Indian Congress on Quality, Environment, Energy & Safety Management Systems, December 2010 at Baroda, Gujarat.
  24. Editor: Waste Management- Proceedings of 1st International Conference on Solid Waste Management, Nov. 2009.
  25. Editor : Proceedings of national seminar of Plastics and Sustainability, February 2008
  26. Editor :Proceedings of Management Development Programme on Total Quality Management, Jadavpur University, August 2008.
  27. Editor : Trends In Management Systems – Proceedings of 5th Indian Congress on Quality, Environment , Energy and Safety Management Systems, March 2007 at New Delhi.(Co-edited with Mr. G. Giani, Secretary Gen., QCI, Mr. V. Parameswaran, Director, CBWE, GOI & Mr. S. K. Roy, EO, CBWE, GOI) CBWE, Ministry of Labour & Employment, Oxford Publishing House, Govt of India.
  28. Editor : Proceedings of national seminar on Municipal Management and Draft Development Plan, Jadavpur University, December 2006.
  29. Editor : Excellence in Management Systems through workers participation‖ – Proceedings of Indian Congress on Quality, Environment, Energy & Safety Management Systems, December 2005 at New Delhi. CBWE, Ministry of Labour & Employment, Oxford Publishing House, Govt of India, (Co-editor with Mr. V. Parameswaran, Director, CBWE, GOI).
  30. Editor : Proceedings of  2nd Indian Congress on Quality, Environment, Energy & Safety Management Systems, CQMS, Jadavpur University, February 2004.
  31. Editor : Proceedings of National Symposium on Plastics Waste Management, CQMS, Jadavpur University, February 2005.
  32. Editor : Proceedings of National Symposium on Electronic Waste Management, CQMS, Jadavpur University, April 2005.
  33. Editor : Proceedings on Production Management for enhancing customer confidence & product quality, CQMS, Jadavpur University, May 2004.
  34. Editor : Proceedings of national symposium on TQM for premium products in Postal Services for the senior IPS officers, CQMS, Jadavpur University, and Department of Posts, Govt of India, August 2003.
  35. Editor : Proceedings of National Symposium on Food Safety and Packaged Drinking Water, CQMS, Jadavpur University, May 2003.
  36. Editor : Proceedings of 1st Indian Congress on Quality, Environment, Energy & Safety Management Systems, CQMS, Jadavpur University, February 2002.
  37. Editor : Proceedings on Production management for enhancing customer confidence, CQMS, Jadavpur University, May 2002.
  38. Editor : Proc. of National Appreciation Programme on Heat Treatment & welding of Pressure Vessel, Dept of Mechanical Engineering, Jadavpur University, India, Feb. 1997.
  39. Editor : Proceedings of Executive Development Programme on Total Quality Management, CQMS, Jadavpur University, December 1996.
  40. Editor : Proceedings of national symposium on BS 5750 & DIS ISO 14001, Dept of Mechanical Engineering, Jadavpur University, India, November 1995.
  41. Editor : Proceedings of national symposium on ISO 9000 and TQM, Dept of Mechanical Engineering, Jadavpur University, India, 1994.
  42. Editor : Proceedings of National Appreciation Programme on ISO 9000 & Total Quality Management, Dept of Mechanical Engineering, Jadavpur University, India, May 1993

PUBLICATION: Peer-Reviewed Journal Articles

Published during  April 2018 – June 2018

  1. Sadhan Kumar Ghosh, P. Agamuthu, (2018). Circular economy: The way forward, Editorial, Waste Management & Research 2018, Vol. 36(6) 481-482;DOI: 10.1177/0734242X18778444 journals.sagepub.com/home/wmr.
  2. Ipsita Saha, Amit Kundu, Sadhan Kumar Ghosh “Organizational Perspective of Critical Success factor to establish ERP as a Sustainable Solution”, The Journal of Army Institute of Management Kolkata, Kindler Volume XVII January – June 2018, PP 150–156.

2017-18

  1. Francesco Di Maria, Federico Sisani, Stefano Contini, Sadhan K. Ghosh, (2018). Impact of different schemes for treating landfill leachate, Waste Management 71 (2018) 255–266.
  2. Ghosh, A., Debnath, B., Ghosh, S. K., Das, B., & Sarkar, J. P. (2018). Sustainability analysis of organic fraction of municipal solid waste conversion techniques for efficient resource recovery in India through case studies. Journal of Material Cycles and Waste Management, 1-17. (Impact Factor: 1.604).
  3. Dasgupta, Raktim & Mukhopadhyay, Arup & Ghosh, Sadhan. (2017). Reduction of lead time through curtailment of cycle time of a supplier-a case example. International Journal of Engineering Trends and Technology. Vol. 54. 233-251. 10.14445/22315381/IJETT-V54P233.
  4. Debnath, B., Chowdhury, R., Ghosh, S. K. (2018). Sustainability of metal recovery from e-waste. Frontiers in Environmental Science and Engineering, 12(6):2. (DOI: 11007/s11783-018-1044-9) (Impact Factor: 1.716) [Online publication awaited].

2016-17

  1. Ghosh, S. K., Debnath, B., Baidya, R., De, D., Li, J., Ghosh, S. K., Zheng, L., Awasthi, A.K., Liubarskaia, M.A., Ogola, J.S. & Tavares, A. N. (2016). Waste electrical and electronic equipment management and Basel Convention compliance in Brazil, Russia, India, China and South Africa (BRICS) nations. Waste Management & Research, 34(8), 693-707. (Impact Factor: 1.9) (Editor’s Choice Paper for August 2016).
  2. Amit K. Chattopadhyay, Prasanta K. Dey, Sadhan K. Ghosh, (2017). Dynamics of spatial heterogeneity in a landfill with interacting phase densities – A stochastic analysis, International Journal of Applied Mathematical Modelling. Applied Mathematical Modelling, https://doi.org/10.1016/j.apm.2016.08.026; Volume 41,  January 2017, Pages 350-358.
  3. Baidya, R., Ghosh, S.K., Parlikar, U.V, (2017), Sustainability of Cement Kiln Co-Processing of Wastes in India: A Pilot Study, Environmental Technology, 1-10. DOI: http://dx.doi.org/10.1080/09593330.2017.1293738.
  4. Rahul Baidya, PrasantaDey, Sadhan Ghosh, Konstantinos Petridis, (2016). Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach, IntJournal ofAdv Manufacturing Technology, DOI 10.1007/s00170-016-9540-1.(2016).
  5. Asit Aich, Sadhan Kumar Ghosh, (2016). Organic fraction of municipal solid waste – a valuable source of green energy in India , International Journal of Energy Sector Management, Vol. 10 No. 4, 2016, p. 000 © Emerald Group Publishing Limited, 1750-6220, DOI 10.1108/IJESM-06-2015-0001, ISSN: 1750-6220.
  6. Debnath B., Chowdhury., R., Ghosh S. K., “Sustainability of Metal Recovery from E-waste.”Frontiers of Environmental Science and Engineering (Impact Factor: 1.799)
  7. Baidya, R., Dey, P. K., Ghosh, S. K.,& Petridis, K. (2016). Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach. The International Journal of Advanced Manufacturing Technology, 1-14. DOI: 10.1007/s00170-016-9540-1
  8. Baidya, R., Ghosh, S. K.,&Parlikar, U. V. (2016). Co-processing of industrial waste in Cement Kiln–A Robust system for material and energy recovery. Procedia Environmental Sciences, 31, 309-317, DOI: https://doi.org/10.1016/j.proenv.2016.02.041
  9. Baidya, R., Debnath, B., De, D., &Ghosh, S. K. (2016). Sustainability of modern scientific waste compacting stations in the city of Kolkata. Procedia Environmental Sciences, 31, 520-529, DOI: https://doi.org/10.1016/j.proenv.2016.02.072
  10. Parlikar, U., Bundela, P. S., Baidya, R., Ghosh, S. K., Ghosh, S. K. (2016). Effect of Variation in the Chemical Constituents of Wastes on the Co-processing Performance of the Cement Kilns. Procedia Environmental Sciences, 35, 506-512. DOI: https://doi.org/10.1016/j.proenv.2016.07.035
  11. Baidya, R., Ghosh, S. K. (2016). Utilization of Discarded Waste in a Composting Plant for Energy Recovery by Plasma Gasification-a Proposed Model. Journal of Solid Waste Technology & Management, 42(1), 806-813.
  12. Baidya, R., Ghosh, S. K. (2016). Plasma Gasification Technology for Energy Recovery from Waste. Journal of Solid Waste Technology & Management, 42(1), 794-805.

2015-16

  1. Debnath B., Baidya R., Ghosh S.K., “Simultaneous Analysis of WEEE management System Focusing on the supply chain in India, UK and Switzerland”, International Journal of Manufacturing & Industrial Engineering, Volume 2, Issue 1, pg. 16 – 20. Publication date: 30th April, 2015. http://www.seekdl.org/nm.php?id=5602

2014-15

  1. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2015), Productivity Improvement by Reduction of Idle Time through Application of Queuing Theory accepted for publication at OPSEARCH, 52, Issue-2, pp 195-211.
  2. De, D., Ghosh S. K., (2014); Implementation and value creation of green productivity by green supply chain management, International Journal of Manufacturing & Industrial Engineering, Volume 2: Issue 1, ISSN: 2374-1589.
  3. Debnath, B., Baidya, R., Ghosh, S. K., (2014), Simultaneous Analysis of WEEE Management System Focusing on the supply chain in India, UK and Switzerland, International Journal of Manufacturing & Industrial Engineering, Volume 2: Issue 1, ISSN: 2374-1589.
  4. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), Developing a Model for Process Improvement Using Multiple Regression Technique: A Case Example in ‘The TQM Journal’. Vol. 26, Issue-6, pp 625-638
  5. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), Measurement System Analysis for implementing design for six sigma in International Journal of Productivity and Quality management, Vol. 14, Issue-3, pp 373-386.
  6. Sarkar, A., Mukhopadhyay A.R., and Ghosh, S. K. (2014), An outline of the ‘Control Phase’ for implementing Lean Six Sigma accepted in the International Journal of Lean Six Sigma, Vol. 5, Issue-3, pp 230-252.

    7. 2013-14

  7. JD Nixon, PK Dey, S K Ghosh, PA Davies, (2013) Evaluation of options for energy recovery from municipal solid waste in India using the hierarchical analytical network process, Energy, Volume 59, Pages 215-223, Publisher Pergamon, publication date 2013/9/15.
  8. JD Nixon, DG Wright, P K Dey, S K Ghosh, PA Davies, (2013) A comparative assessment of waste incinerators in the UK, Journal of Waste Management, Elsevier, Vol. 33, Issue 11, Pages 2234-2244, Publisher Pergamo, publication date 2013/11/30.
  9. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2013) “Root cause analysis, Lean Six Sigma and test of hypothesis”, The TQM Journal, Vol. 25 Issue: 2, pp.170-185, https://doi.org/10.1108/17542731311299609.
  10. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2013) “Improvement of claim processing cycle time through Lean Six Sigma methodology”, International Journal of Lean Six Sigma, Vol. 4 Issue: 2, pp.171-183, https://doi.org/10.1108/20401461311319347.

2012-13  

  1. Roy, T. K, Mukhopadhyay, Arup, Ghosh, Sadhan, Majumdar, Gautam. (2013). Estimation of Noise of a Moving Passenger Car. Indian Journal of Environmental Protection. 33(6), January 2013..
  2. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2012), Forecasting Daily Workflow Volumes for Medical Transcription Process, IAPQR Transaction, Vol 37, No 2, 2012, pp 83-102

2010-11

  1. Sadhan Kumar Ghosh, Sannidhya Kumar Ghosh (2011). Rebuilding C&D Waste Recycling Efforts in India, Waste Management World, September 2011 issue, Volume 12, Issue 5.
  2. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2011), Improvement of Service Quality by Reducing Waiting Time for Service, Journal of Simulation Modelling Theory and Practice, Elsevier, Vol 19, Issue 7, (2011) P 1689-1698.
  3. Ashok Sarkar, Arup Ranjan Mukhopadhyay, Sadhan Kumar Ghosh, (2011) “Selection of critical processes for “process improvement””, International Journal of Lean Six Sigma, Vol. 2 Issue: 4, pp.356-370, https://doi.org/10.1108/20401461111189434
  4. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2011), Comparison of Performance Appraisal Scores among Different Functions, Research and Practice in Human Resource Management, Vol 2, 2011, pp 92-100.
  5. Chaudhuri, Debaprayag & Mukhopadhyay, Arup & Ghosh, Sadhan. (2011). Assessment of engineering colleges through application of the Six Sigma metrics in a State of India. International Journal of Quality & Reliability Management. 28. 969-1001. 10.1108/02656711111172540.

 
2010-2009

  1. Ashok Sarkar, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2010), Issues in Pareto Analysis and its resolution, TQM and Business Excellence, Vol 24, 2011, No. 5-6, pp641-651.
  2. Roy, T. K, & Mukhopadhyay, Arup & Ghosh, Sadhan & Majumdar, Gautam. (2010). Honking -Its Influence on Noise Pollution. Indian Journal of Environmental Protection, 30(8), 653-658, ISSN :0253-7141.

 
PUBLICATION: CONFERENCE PROCEEDINGS
2017-18

  1. Sadhan Kumar Ghosh, (2018), Zero Waste and Zero Landfill, Proceedings of the 33rd International Conference on Solid Waste Technology and Management, Widener University, Annapolis, USA, March 11-14, 2018.
  2. , B., Banerji., A., Chowdhury., R. &Ghosh, S.K. (2018). Kinetic Studies on FR-4 type Waste Printed Circuit Board (PCB) Pyrolysis. Recycle 2018, 2nd International Conference on Waste Management. IIT Guwahati, India, 22-24 February, 2018. (Abstract Only)
  3. , B., Chowdhury., R. &Ghosh, S.K. (2018). Recycling of WEEE Polymers: Issues, Challenges and Opportunities. International Conference on Advanced Polymeric Materials (APM 2018), pp. 196, CIPET, Bhubaneswar, India, 2-4 February, 2018. (Abstract only)
  4. , B.&Ghosh, S.K. (2018). Sustainable utilization of Polymeric Materials recovered from E-waste.International Conference on Current Trends in Materials Science and Engineering (CTMSE 2018), pp. 101, Hyderabad, India, 19-20 January, 2018. (Abstract only)
  5. , B., Chowdhury., R. &Ghosh, S.K. (2017). Studies on sustainable material recovery via Pyrolysis of WEEE. Indian Chemical Engineering Congress (Chemcon 2017) pp. 31-33, Haldia, India, 27-30 December, 2017. (Extended Abstract Only)
  6. K. Ghosh, F. Di maria (2017), A comparative study of issues, challenges and strategies of bio-waste management in India and Italy, Sardinia_2017, 16th International Waste Management and Landfills Symposium, S. Margharita De Pula (CA), Italy, October 206, 2017.
  7. , B., Ghosh., A. &Ghosh, S.K. (2017). Sustainability of MSW treatment technologies in India. Indian Chemical Engineering Congress (Chemcon 2017) pp. 10-12, Haldia, India, 27-30 December, 2017. (Extended Abstract Only)
  8. , B., Chowdhury., R. &Ghosh, S.K. (2017). Supply Chain Analysis for Metal Recovery from E-Waste (MREW) Facility focusing on Pyrolysis as a pre-treatment process.7th International Conference on Solid Waste Management (7thIconSWM), pp. 1125 – 1131, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  9. , B.&Ghosh, S.K. (2017). A Generalised Discussion on Hydrogen Generation from Biorefinery Waste Streams from the Perspective of Sustainability. 7th International Conference on Solid Waste Management (7thIconSWM), pp. 244, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  10. Debnath, B.,Alghazo, J.M., Latif., G., Roychoudhuri, R., &Ghosh, S.K. (2017). An analysis of Data Security and potential threat from IT assets for Middle Card players, Institutions and Individuals. 7th International Conference on Solid Waste Management (7thIconSWM),  1057-1070, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  11. Debnath, B.,Ghosh, A., Prathima., B., Birawat, K., &Ghosh, S.K. (2017). Status of Composting for OFMSW treatment in Karnataka and West Bengal:Case Studies and Sustainability. 7th International Conference on Solid Waste Management (7thIconSWM),  1432-1442, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  12. Dutta, N., Ghosh, A., Debnath, B., &Ghosh, S.K. (2017). Climate Change in Hilly Regions of India: Issues and Challenges in Waste Management. 7th International Conference on Solid Waste Management (7thIconSWM),  1443-1452, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  13. Debnath B., Roychoudhuri., R., and Ghosh S. K., Risk Assessment of E-waste Recycling with a focus on ISO 9000 Standard. 7thInternational Conference on Solid Waste Management (7thIconSWM),  1175-1182, Hyderabad, India, 15-17 December, 2017. (Publication in Springer Book Chapter Awaited)
  14. , B., &Ghosh, S.K. (2017). Sustainability of Energy generation from Biorefinery Waste.International Conference on Energy Options for Tomorrow: Technology to Sustainability (ICEOT 2017), Eco Vista, Kolkata, India, 17-19 April, 2017, pp.164-176.
  15. Baidya, R.,Saha, I., Bhattacharya, T., Ghosh, S. K., (2018), Supply chain robustness of waste transportation in Kolkata using DBMS and Image sensing. Innovative Digitization Techniques towards Mission Digital India – (IDT-MDI, 2018), 12th-13th January 2018.
  16. Mukherjee, T., Baidya, R.,Ghosh, S. K., (2018), Model for Prediction of MSW Generation in India Using Artificial Neural Network (ANN), Innovative Digitization Techniques towards Mission Digital India – (IDT-MDI, 2018), 12th-13th January 2018.
  17. Baidya, R.,Ghosh, S. K., &Parlikar, U. V. (2017). Blast Furnace Flue Dust Co-processing in Cement Kiln – A Pilot Study, IconSWM – 2017, Hyderabad, 15 – 17, December. . (Publication in Springer Book Chapter Awaited)
  18. Baidya, R, Bhattacharya, T, Kumar, G., Ghosh, S.K, DecentralisedUtlization of Urban Biomass Waste and Solar Energy for Cooling System – A Proposed Model, IconSWM – 2017, Hyderabad, 15 – 17, December. . (Publication in Springer Book Chapter Awaited)
  19. Dutta, K., Baidya, R., Ghosh, S.K., (2017) NDT Process Selection in Petrochemical Construction Site through Strategic Application of the Analytical Hierarchy Process, International Conference on Energy Options for Tomorrow: Technology to Sustainability (ICEOT 2017), 17 – 19 April 2017, Kolkata, India, pp 100-106.
  20. Mukherjee, T., Baidya, R., Ghosh, S. K., (2018) Model for Prediction of MSW Generation in India Using Artificial Neural Network (ANN). The 33rd International Conference on Solid Waste Technology and Management, USA, March 11-14, 2018.
  21. Ipsita Saha, AmitKundu, Sadhan Kumar Ghosh “ Exploring the rationale between ERP and EPR in Asian Countries using cloud based Approach” Accepted and invited for oral presentation at 7th International Conference on Solid Waste Management at PJTSAU, Hyderabad, Telenganaon 15th -17th December,2017 (Publication in Springer Book Chapter Awaited).
  22. Ipsita Saha, AmitKundu, Sadhan Kumar Ghosh “Organizational Perspective of Critical Success factor to establish ERP as a Sustainable Solution” at 11th ISDSI International Conference at Indian Institute of Management Tiruchirappalli on December 28 – 30, 2017.
  23. Ipsita Saha, AmitKundu, Sadhan Kumar Ghosh“Cloud Computing Based Sustainable Approach towards E-waste Management in India” Accepted and invited for oral presentation at International Conference on Waste Management “RECYCLE-2018″ at Indian Institute of Technology Guwahati, Guwahati, India on 22-24 February,2018.
  24. Ipsita Saha, AmitKundu, Sadhan Kumar Ghosh “Exploring the rationale between ERP and EPR in Asian Countries using cloud based Approach” is selected for the book chapter publication being published by Springer with book title: “Sustainable Waste Management : Policies and Case Studies”, 7th IconSWM – ISWMAW 2017, Volume 1

 
2016-17
 

  1. Debnath, B., Raychaudhuri, A., & Ghosh, S. K. (2016). Analysis of Grey Water Recycling Technologies using Analytical Hierarchical Process.Journal of Solid Waste Technology & Management, 42(1), 559-568.
  2. Debnath, B., Chowdhury, R., & Ghosh, S. K. (2016). Bio-metallurgical recovery of Gold from Printed Circuit Boards (PCB): A Review.Journal of Solid Waste Technology & Management, 42(1), 760-770.
  3. Haldar, H. S., Chatterjee, S., Debnath, B., Ghosh, S. K., Ghosh, S. K. (2016). Post Earthquake C&D Waste Management-Case studies of Nepal. Journal of Solid Waste Technology & Management,42(1), 486-498.
  4. Ghosh, S. K., Roychoudhuri, R., Wath, S. B., Debnath, B., Jayakumar, S., &Maloo, A. (2016). Waste Management in India: E-waste recycling &Bio-methanation-Case studies.Journal of Solid Waste Technology & Management, 42(1), 748-759.
  5. Sadhan Kumar Ghosh, (2016). Potential of economic utilization of biomass waste in India – Implications towards SDGs, (Short Background Paper for Plenary Session 3 of the Programme), Seventh Regional 3R Forum in Asia and the Pacific. 2-4 November, 2016, Adelaide, SA, Australia by UNCRD, Japan.
  6. Sadhan Kumar Ghosh, (2016). Sustainable SWM in Developing Countries Focusing on Faster Growing Economies, India and China, International Conference on Solid Waste Management, 5IconSWM 2015, Procedia Environmental  Sciences, 35 ( 2016 ),p176 – 184.
  7. Sadhan K Ghosh, H.S. Haldar, S. Chatterjee, P. Ghosh (2016). An Optimization Model on Construction and Demolition Waste Quantification from Building, International Conference on Solid Waste Management, 5IconSWM 2015; Procedia Environmental  Sciences 35 (2016), 279  –  288, 1878-0296.  DOI: 10.1016/j.proenv.2016.07.008;
  8. Aich, A., Sadhan K Ghosh (2016), Application of SWOT Analysis for the Selection of Technology for Processing and Disposal of MSW, International Conference on Solid Waste Management, 5IconSWM 2015; Procedia Environmental  Sciences,35 ( 2016),209–228. 1878-0296.
  9. Sadhan Kumar Ghosh, (2016), Swachhaa Bharat Mission (SBM) – A Paradigm Shift in Waste Management and Cleanliness in India, Procedia Environmental  Sciences, 35 (2016)15  –  27;  1878-0296.  DOI: 10.1016/j.proenv.2016.07.008;
  10. Sadhan Kumar Ghosh, (2016), Biomass & Bio-waste Supply Chain Sustainability for Bio-energy and Bio-fuel Production, The Tenth International Conference on Waste Management and Technology (ICWMT), Procedia Environmental  Sciences, 31 (2016 ), 31 – 39.
  11. , B., Ghosh, S. K. (2017). E-waste Recycling in India: A Case Study.The 32ndInternational Conference on Solid Waste Technology and Management (ICSW 2017), Philadelphia, PA, USA, 19-22 March, 2017, pp.223 – 232.
  12. Ipsita Saha, Sadhan K. Ghosh, Amit Kundu, (2017), Novel Approach for Laptop and Cell Phone Waste Management Using Cloud Based Data Storage Systems, The 32nd International Conference on Solid Waste Technology and Management (ICSW 2017), Philadelphia, PA, USA, 19-22 March, 2017.
  13. , B., Roychoudhuri., R.,& Ghosh, S.K. (2017). Sustainability Analysis of Green Computing Alternatives using AHP and QFD.The 32nd International Conference on Solid Waste Technology and Management (ICSW 2017), Philadelphia, PA, USA, 19-22 March, 2017, pp.450 – 459.
  14. , B., Chowdhury., R., & Ghosh, S. K. (2017). Studies on Resource Recovery from E-waste via Thermochemical Route. 4th 3RInternational Scientific Conference on Material Cycles  and Waste Management,  India Habitat Centre, New Delhi, India, 8-10 March, 2017. (Extended Abstract only).
  15. , B., Chowdhury., R. Ghosh, S. K. (2016). An Analysis of E-waste Recycling Technologies from the Chemical Engineering Perspective.. 6th International Conference on Solid Waste Management (6thIconSWM), pp. 1189 – 1195, Jadavpur University, Kolkata, India, 24-26 November, 2016. (Publication in Springer Book Chapter Awaited).
  16. , R.,Debnath., B., De., D., Albores., P., Banerjee., C., Ghosh, S. K. (2016). Estimation of E-waste generation – A lifecycle based approach. 6th International Conference on Solid Waste Management (6thIconSWM), pp. 1129-1124, Jadavpur University, Kolkata, India, 24-26 November, 2016. (Publication in Springer Book Chapter Awaited).
  17. , R.,Debnath., B., Ghosh, S. K. (2016).  Analysis of E-waste supply chain framework in India using Analytical Hierarchy Process. 6th International Conference on Solid Waste Management (6thIconSWM), pp. 1181-1188, Jadavpur University, Kolkata, India, 24-26 November, 2016. (Publication in Springer Book Chapter Awaited)
  18. , A.,Debnath., B., Ghosh, S. K. (2016). Carbon Nanotubes as a Resourceful product Derived from Waste Plastic – A Review. 6th International Conference on Solid Waste Management (6thIconSWM), pp. 1234 – 1247, Jadavpur University, Kolkata, India, 24-26 November, 2016. (Publication in Springer Book Chapter Awaited)
  19. Debnath B., Chowdhury., R., and Ghosh S. K., Sustainability of Metal Recovery from E-waste. The Eleventh International Conference on Waste Management and Technology (ICWMT 10), China, October, 2016.
  20. Debnath B., Roychoudhuri., R., and Ghosh S. K., Risk Assessment of WEEE over the whole Lifespan of EEE using ISO 9001:2015 Standard. The Eleventh International Conference on Waste Management and Technology (ICWMT 10), China, October, 2016.
  21. Debnath, B., Roychoudhuri, R., Ghosh, S. K. (2016). E-Waste Management–A Potential Route to Green Computing.Procedia Environmental Sciences, 35, 669-675. [via 5th International Conference on Solid Waste management (5thIconSWM), IISC Bangalore, India,  24-27 November, 2015] (Excellent Paper Award).
  22. Mukherjee, A., Debnath, B., Ghosh, S. K. (2016). A Review on Technologies of Removal of Dioxins and Furans from Incinerator Flue Gas. Procedia Environmental Sciences,35, 528-540.[via5th International Conference on Solid Waste management (5thIconSWM), IISC Bangalore, India,   24-27 November, 2015].
  23. Payel Ghosh, Sadhan Kumar Ghosh, (2016). Cost Analysis of Municipal Solid Waste Management Using Waste Compacting Stations: A Case Study, Proceeding of 6th International Conference on Solid Waste Management, November 25-27, 2016, Kolkata, India. [ISBN 81-86862-56-0].
  24. PayelGhosh, Sadhan Kumar Ghosh, (2016). Construction and Demolition Waste Management using Fuzzy Goal Programming, The Thirty-First International Conference on Solid Waste Technology and Management, April 3- 6, 2016, Philadelphia, PA U.S.A. [ISSN: 1088-1697].
  25. Sutripta Sarkar, Sadhan K Ghosh (2017). Impact of Composting and Landfill emissions of climate change. The 32nd International Conference on Solid waste Technology and Management Proceedings ( ISSN 1091-8043). pp 469-474.
  26. Ankita Das, Sadhan K Ghosh (2016). Developing a Decision Support System for Municipal Vacant Land and Waste Management with Optimised Route Technique, Proceedings of the 6th International Conference on Solid Waste Management, November 25-27, 2016, Kolkata, India. [ISBN 81-86862-56-0].
  27. Ghosh S. K., Roychoudhuri R., Wath S.B., Debnath B., Jayakumar S., Maloo A., “Waste Management in India: E-waste Recycling & Bi-omethanation – Case Studies.” The Thirty First International Conference on Solid Waste Technology and Management, Philadelphia, USA. April 2016.
  28. Sadhan Kumar Ghosh, Joonheon Lee, AchiChibueze Godwin, AdekunleOke, Reem Al-Rawi , Mervat El-Hoz, “Waste Management in USA through Case Studies: E-waste Recycling and Waste to Energy “, The Thirty First International Conference on Solid Waste Technology and Management, Philadelphia, USA. April 2016.
  29. Raychaudhuri, A., Ghosh, S. K. (2016). Lignocellulosic Biomass Supply Chain for Bioethanol Production. Journal of Solid Waste Technology & Management, 42(1).
  30. El-Hoz, M., Aremu, A. S., Roychoudhury, A., Ojowuro, O. M., Ugunbiyi, A., Ghosh, S. K. (2016). Strategies for Reducing Municipal Solid Waste in Lebanon, Nigeria and India. Journal of Solid Waste Technology & Management, 42(1).
  31. Das, M., Ghosh, S. K. (2016). Comparative Study of Whey Utilization in India, New Zealand, and Australia-Identifying Untapped Potential and Means of Utilization. Journal of Solid Waste Technology & Management, 42(1).

2015-16

  1. Ghosh, S.K., Baidya, R., De, D., Debnath, B., Ghosh, S.K., Li, J., Ghosh, S.K., Zheng, L., Awasthi, A.K., Liubarskaia, M.A., Ogola, J.S., Tavares, A.N., (2015), WEEE management and Basel Convention compliance in BRICS Nations, International Conference on Waste Management and Technology; China, pp 1197-1214. (Excellent Paper Award).
  2. Ghosh S.K., “Developing Low Carbon SMEs in India through Lean and Green Manufacturing systems, Regional Forum on Climate Change (RFCC), AIT, Thailand, July 1-3, 2015.
  3. Ghosh S.K., Roychoudhuri R., Wath S.B., Debnath B., Jayakumar S., Maloo A., “Waste Management in India: E-waste Recycling & Bi-omethanation – Case Studies.” The Thirty First International Conference on Solid Waste Technology and Management, Philadelphia, USA. April 2016.
  4. Sadhan Kumar Ghosh, PayelGhosh, Construction and Demolition Waste Management Using Domain Based Fuzzy Goal Programming, Thirty First International Conference on Solid Waste Technology and Management, Philadelphia, USA. April 2016.
  5. Sadhan Kumar Ghosh,Joonheon Lee, AchiChibueze Godwin, AdekunleOke, Reem Al-Rawi , Mervat El-Hoz, “Waste Management in USA through Case Studies: E-waste Recycling and Waste to Energy “, The Thirty First International Conference on Solid Waste Technology and Management, Philadelphia, USA. April 2016.
  6. Ghosh S. K., “Biomass and bio-waste Supply Chain for Bio-energy and Bio-fuel production, From:The Tenth International Conference on Waste Management and Technology (ICWMT 10), China, 28- 30th October, 2015, pp. 587-596. Procedia Environmental Sciences.
  7. Debnath B., Roychowdhuri R., Ghosh S.K., “E-waste Management – A potential route to Green ” IconSWM, IISC Bangalore 24-27 November, 2015, pp. 978-983. (Excellent Paper Award).
  8. Mukherjee A., Debnath B., Ghosh S.K., “A review on Technologies of Removal of Dioxins and Furans from Incinerator Flue Gas.” IconSWM, IISC Bangalore 24-27 November, 2015, pp. 1149-1161.
  9. Debnath, B., & Ghosh, S. K. (2015). Preparation and Characterization of Adsorbent from Waste Printed Circuit Boards. Journal of Solid Waste Technology & Management, 41(4).
  10. Debnath, B., Raychaudhuri, A., & Ghosh, S. K. (2016). Analysis of Grey Water Recycling Technologies using Analytical Hierarchical Process. Journal of Solid Waste Technology & Management, 42(1).
  11. Debnath, B., Chowdhury, R., & Ghosh, S. K. (2016). Bio-metallurgical recovery of Gold from Printed Circuit Boards (PCB): A Review. Journal of Solid Waste Technology & Management, 42(1).
  12. Haldar, H. S., Chatterjee, S., Debnath, B., Ghosh, S. K., & Ghosh, S. K. (2016). Post Earthquake C&D Waste Management-Case studies of Nepal.Journal of Solid Waste Technology & Management, 42(1).
  13. Raychaudhuri, A., & Ghosh, S. K. (2016). Lignocellulosic Biomass Supply Chain for Bioethanol Production. Journal of Solid Waste Technology & Management, 42(1).
  14. El-Hoz, M., Aremu, A. S., Roychoudhury, A., Ojowuro, O. M., Ugunbiyi, A., & Ghosh, S. K. (2016). Strategies for Reducing Municipal Solid Waste in Lebanon, Nigeria and India. Journal of Solid Waste Technology & Management, 42(1).
  15. De, D., & Ghosh, S. K. (2015). Waste to energy in India and UK: Analysis through case studies. Journal of Solid Waste Technology & Management,41(4).
  16. De, D., & Ghosh, S. K. (2015). Waste Management in the Public Transport Systems in India, China and the UK – A comparative analysis, Proceedings of the International Conference on Solid Wastes 2015: Knowledge Transfer for Sustainable Resource Management, Hong Kong SAR, P.R. China, 19 23 May 2015, pp 176-179
  17. Das, M., & Ghosh, S. K. (2016). Comparative Study of Whey Utilization in India, New Zealand, and Australia-Identifying Untapped Potential and Means of Utilization. Journal of Solid Waste Technology & Management, 42(1).
  18. Baidya, R., Debnath, B., De, D., & Ghosh, S. K. (2016). Sustainability of Modern Scientific Waste Compacting Stations in the City of Kolkata.Procedia Environmental Sciences, 31, 520-529.
  19. Baidya, R., Ghosh, S. K., & Debnath, B. (2015, March). Analysis of parameters for green computing approach using the analytical hierarchy process. In Energy Economics and Environment (ICEEE), 2015 International Conference on (pp. 1-4). IEEE.
  20. Baidya, R., & Ghosh, S. K. (2015). Model for a Predictive Maintenance System Effectiveness Using the Analytical Hierarchy Process as Analytical Tool. IFAC-PapersOnLine, 48(3), 1463-1468.
  21. Baidya, R., Ghosh, S. K., & Parlikar, U. V. (2016). Co-processing of Industrial Waste in Cement Kiln–A Robust System for Material and Energy Recovery. Procedia Environmental Sciences, 31, 309-317.
  22. Baidya, R., Ghosh, K., Ghosh, S. K., &Parlikar, U. (2015). Co-processing of Waste in Cement Plants. Journal of Solid Waste Technology & Management, 41(4).
  23. Parlikar, U., Bundela, P. S., Baidya, R., Ghosh, S. K., & Ghosh, S. K. (2016). Effect of Variation in the Chemical Constituents of Wastes on the Co-processing Performance of the Cement Kilns. Procedia Environmental Sciences, 35, 506-512.
  24. Baidya, R., De, D., Ghosh, S.K, (2015), Supply Chain sustainability of Waste to Energy Plants in India, International Conference on Waste Management & Environment, Malaysia. ISBN 978-967-13588-0-1, pp 488-500.
  25. Baidya, R., Debnath, B., Ghosh, S.K., (2015), Water Hyacinth: A Sustainable Biomass to Energy an Indian Perspective, Atmospheric Science symposium, Turkey, Istanbul, pp 1221-1231.
  26. Debnath B., Ghosh S.K., “Green Computing as Low Carbon Process – Analysis using AHP.”, Regional Forum on Climate Change (RFCC), AIT, Thailand, 2015.
  27. Baidya, R., Ghosh, S.K., (2015), Low Carbon Cement Manufacturing Process by Co-processing of Waste in India, Regional Forum on Climate Change (RFCC) Low Carbon and Climate Resilient Societies, Bangkok, Thailand, pp 249-252.
  28. Baidya, R.,Ghosh, S.K., (2015) Evaluation of Technologies for Energy Recovery from MSW in India using Combined AHP and QFD, International Conference on Solid Wastes 2015: Knowledge Transfer for Sustainable Resource Management, Hong Kong SAR, China, pp 162-165.
  29. Baidya, R., Ghosh, S.K.,Parlikar, U.V, (2015), Sustainability of Cement Kiln Co-processing of Wastes in India: A Pilot Study, International Conference on Solid Wastes 2015: Knowledge Transfer for Sustainable Resource Management, Hong Kong SAR, China, pp 843-846.
  30. Baidya, R., Debnath, B., Ghosh, S.K., Dey, P.K., (2015) Supply Chain Analysis of an E-Waste Processing Plant Using the Analytical Hierarchy Process and Quality Function Deployment, 5th International Conference on Solid Waste Management, Bangalore, India, pp 962-977.
  31. Debnath, B., Baidya, R., Ghosh, S. K. (2015), Comparative analysis of sustainability of E-Waste management in different countries using AHP, International Conference on Waste Management & Environment, Malaysia. ISBN 978-967-13588-0-1, pp 383-393.
  32. Parlikar, U., Ahuja, D., Sengupta, B.S., Baidya, R., Ghosh, S.K., Ghosh, S.K., (2015), Disposal of Wastes By Co-Processing in Cement Kilns – Influence Of Their Varying Characteristics on Critical Kiln Emission Parameters, 14th NCB International Seminar on Cement and Building Materials, New Delhi, India. (Excellent Paper Award)
  33. Baidya, R., &Ghosh, S. K. (2016). Plasma Gasification Technology for Energy Recovery from Waste. Journal of Solid Waste Technology & Management, 42(1).
  34. Baidya, R., &Ghosh, S. K. (2016). Utilization of Discarded Waste in a Composting Plant for Energy Recovery by Plasma Gasification-a Proposed Model. Journal of Solid Waste Technology & Management, 42(1).

 

2014-15

  1. Ghosh S.K., (2015) Sustainable SWM in developing countries focusing on two faster growing economics, India and China, 30thInternational Conference on Solid Waste Technology and Management, Philadelphia, PA U.S.A, 15-18th March, 2015, pp 1-12.
  2. Baidya, R., &Ghosh, S. K. (2015). Model for a Predictive Maintenance System Effectiveness Using the Analytical Hierarchy Process as Analytical Tool. IFAC-PapersOnLine, 48(3), 1463-1468. ISSN: 2405-8963.
  3. Baidya, R., Ghosh, S.K.,Ghosh, S.K., Parlikar, U., (2015), Co-processing of Waste in Cement Plants, 30thInternational Conference on Solid Waste Technology and Management, Philadelphia, PA U.S.A, 15-18th March, 2015, pp 513-525.
  4. De, D. Ghosh S.K., (2015) Waste to energy in India and the UK – an analysis through case studies, 30thInternational Conference on Solid Waste Technology and Management, Philadelphia, USA, 15-18th March, 2015pp 949-962.
  5. Debnatha, B., Ghosh, S.K. , Preparation and Characterization of Adsorbent from Waste Printed Circuit Boards, 30thInternational Conference on Solid Waste Technology and Management, Philadelphia, PA U.S.A, 15-18th March, 2015, pp 996-1003.
  6. De, D., Ghosh S.K., (2014); Implementation and value creation of green productivity by green supply chain management, International Conference on Advances in Civil, Structural and Mechanical Engineering, Birmingham, UK, 16 -17, November, 2014, pp 30-34.
  7. Debnath, B., Baidya, R., Ghosh, S.K., (2014), Simultaneous Analysis of WEEE Management System Focusing on the supply chain in India, UK and Switzerland” International Conference on Advances in Civil, Structural and Mechanical Engineering; Birmingham, UK, 16 -17, November, 2014, pp 85– 89, ISBN: 978-1-63248-054-5.
  8. Ghosh, S. K., Singh, N., Debnath, B., De, D., Baidya, R., Biswas, N.T, Ghosh, S.K, Lili, L., Dey, P.K, Li, J., (2014). Comparative analysis of E-waste Supply Chain in India, China and the UK”, 9th International Conference on Waste Management and Technology; Beijing, China, 29 – 31st October, 2014, pp 1131-1140.
  9. Debnath, B., Biswas, N.T, Baidya, R., Ghosh, S.K., (2014) Nanotechnology in waste water treatment: A Review, International Conference “Ecology of Urban Areas”; Zrenjanin, Serbia, October 9-10, 2014, pp 563 – 575, ISBN 978-86-7672-237-2.
  10. Baidya, R., Debnath, B., Ghosh, S.K., (2014), An Analysis of the Supply Chain of E-waste Management in India using the Analytical Hierarchy Process, International Conference on Environment and Energy, Hyderabad, India, December 15-17th 2014, pp195, ISBN: 978-93-81212-96-7.
  11. Ghosh, S. K.,Baidya, R., Debnath, B., Biswas, N.T, De, D., Lokeswari, M., (2014), E-waste supply chain issues and challenges in India using QFD as analytical tool, International Conference on Computing, Communication & Manufacturing; Howrah, India, pp 287-291, ISBN: 978-0-9940194-0-0.
  12. Baidya, R., Debnath, B., Ghosh, S.K, (2015), Analysis of parameters for green computing approach using the analytical hierarchy process” International Conference on Energy Economics and Environment, Uttar Pradesh, India. 27-28th March, 2015, pp 119.
  13. Debnath, B., Baidya, R., Biswas, N.T., Kundu, R., Ghosh, S.K, (2014), E-waste recycling as criteria for Green computing approach: Analysis by QFD tool, Chapter 17, K. Maharatna et al. (eds.), Computational Advancement in Communication Circuits and Systems, Lecture Notes in Electrical Engineering 335, DOI 10.1007/978-81-322-2274-3_17. ISBN: 978-81-322-2273-6.
  14. Debnath, B., Baidya, R., Biswas, N.T., Kundu, R., Ghosh, S.K, (2014), International Conference on Computational Advancement in Communication Circuits and Systems, Kolkata, pp 43.
  15. Ghosh S. K., Biswas, N. T., Debnath, B., Kundu, R., (2014), Optimization of Supply Chain Network (SCN) in Waste Management using Genetic Algorithm and Fuzzy Logic: A Hybrid Approach, National Conference on Mathematical Trends in Physical Sciences, pp 28 – 33.
  16. Sarkar, S K Ghosh , (2014), Bio energy production utilising Biomass, 9th International Conference on Waste Management and Technology; Beijing, China, 29 – 31st October, 2014, pp 1131-1140.

 
2013-14

  1. Sadhan K Ghosh, (2014), “Sustainable Global Waste Management” International Research Conference – 21st century trends in Education and Research, February 05 – 07, 2014, St. Paul University Philippines, Tuguegarao, Philippines.
  2. Sen P, Ray, P K, Ghosh S K, (2013), Approaches of Environmental Performance Measurement and Evaluation for Manufacturing Organizations, Proceedings of the Int Conference on Managing the Asian Century, Singapore, 11-13, July 13.
  3. Sadhan K Ghosh, et al., (2013), A Scientific study and Impact Assessment of Decentralised Biogas plants implemented by NIE-CREST, Proceedings of the 2nd International Conference on solid waste, 2nd icswkh2013, HK Baptist University, Hong Kong, May 5-8, 2013.
  4. Sadhan Kumar Ghosh, (2013). Review of C & D Wastes Supply Chain Management in India, Proceedings of the 2nd International Conference on solid waste, 2nd icswkh2013, HK Baptist University, Hong Kong, May 5-8, 2013.
  5. Asit Aich, Sadhan Kumar Ghosh, (2013). Energy potential of urban solid waste through anaerobic digestion route in SAARC countries, Proceedings of the 2nd International Conference on solid waste, 2nd icswkh2013, HK Baptist University, Hong Kong, May 5-8, 2013.
  6. Sadhan Kumar Ghosh, (2013). Sustainable Development in Waste Management in India, Proceedings of the International Conf on Waste and Health, ICWWH 2013, IIWM, DST, Bhopal, Feb 15-17, 2013.

 

2012-13

  1. Sonali Roy Choudhury, Sadhan Kumar Ghosh, (2013). Multivariate Analysis of Municipal Solid Waste Characteristics In Urban India, Proceedings of the 2nd International Conference on solid waste, 2nd ICSWKH 2013, HK Baptist University, Hong Kong, May 5-8, 2013.
  2. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2012), Addressing Environmental concern through Lean Six Sigma – a Greener Approach, 2nd International Conference on Solid Waste Management, 2012, pp 71-76.
  3. Asit Aich, Sadhan Kumar Ghosh, (2012). Windrow Composting is More Financial Viable Option than Vermi Composting and Anaerobic Digestion for the Disposal and Processing of Municipal Waste of Big Cities, 3rd IconSWM 2012 , Proceedings of International Conf on SWM, Mysore, Infosys Campus, July 30- Aug 01, 2012, pp 353 – 361, ISBN : 81- 86862 – 45 – 5.
  4. Sadhan Kumar Ghosh, (2011). Electronic waste (E-waste): An emerging global waste stream”, Waste Management – Proceedings of International Conf on SWM 2009, OPH, pp 193-198, 2009.
  5. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2010), Process Modelling and Measures in Lean Six Sigma, Proceedings of International Conference on Quality, Reliability and Operations Research, pp 39-45.
  6. Debaproyag Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (October,2009), Implementation of Total Quality Management in Public Fund Management, Journal of Insurance & Risk Management (Pravartak), Vol.IV, Issue.10, pp.26-32.
  7. Debaproyag Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (May,2010), A Discussion on the Issues of Questionnaire Design for Sample survey, Research Analysis and Evaluation, Vol.1, Issue.8, pp.60-62, ISSN 0975 3486.
  8. Debaproyag Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (December,‟2010), A study to examine the objectives and achievements of engineering education in West Bengal by the national perspectives, Vishwabharati, Vol.1, Issue 4, Page 14-19, ISSN 0975 9883.
  9. Debaproyag Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (September – November 2010), Assessment the engineering departments of Indian Institute of Technology Kanpur through application of six sigma metrics, i-manager‟s Journal of Management, Vol. 5, No. 2,Page, 60-67.
  10. Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (October,2010), Implementation issues of TQM in Financial Service sectors, National Conference on “Inclusive Growth in India-An emphasis on Financial and Social Inclusion”, 7th October 2010, Department of Management Studies, Women‟s Christian College, Chennai.
  11. Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (October,2010), Relationship Management to improve customer’s satisfaction in Insurance service sector, 3rd HR Summit, 2010 on “Enhancing Employability Skills-Exploring Gaps”, 23rd October 2010, Gian Jyoti Institute of Management and Technology (GJIMT), Mohali.
  12. Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (Dec‟2010), A comparative study of engineering colleges in West Bengal and other foreign countries‟, 40th ISTE Annual Convention 2010,MEPCO Schlenk Engineering College, Sivakasi, Tamil Nadu, 2nd to 4th December,2010.
  13. Roy Choudhury, Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, A study of problem solving capabilities with Lean process management, Proceedings of 1st International Quality Congress & 6th Indian Congress on Quality, Environment, Energy and Safety Management System, December 20-21, 2010, M. S. University Vadodara, page 183-190.
  14. Sadhan Kumar Ghosh, (2009).An overview of Waste to Energy facilities in Europe”, Waste Management – Proceedings of International Conf on SWM 2009, OPH, pp 7-11, 2009
  15. Asit Aich, Sadhan Kumar Ghosh, (2009). Quantative and qualitative analysis of leachate from waste dupms in urban dumping sites”, Waste Management – Proceedings of International Conf on SWM 2009, OPH, pp 85-93, 2009.
  16. Sadhan Kumar Ghosh, (2009). Study of different types of Waste Collection bins”, Waste Management – Proceedings of International Conf on SWM 2009, OPH, pp 114-122, 2009.
  17. Sadhan Kumar Ghosh, (2008). Plastics Sustainability through standardization”, Polymer Journal, Times of India Journal, Feb 2008, p22 – 28.
  18. Sadhan Kumar Ghosh, (2008). Energy Recovery from Municipal Wastes”, Energy Recovery from Municipal Wastes Journal published by Dept of Science & Technology, Govt of West Bengal on the World Environment Day, 2008, June 2008, p17 – 26.
  19. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2007), Finding a Satisfactory Way to Measure the Healthcare Experience, Six Sigma Forum, American Society for Quality, Volume 7, Number 1, November 2007, 27-36.
  20. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2006), Reducing Cycle Time in a Hospital for Admission, Medication and Discharge Processes, The Vision, Jomas, Bengal Engineering & Science University, Volume II, Number 3, July – September 2006, 74-98.
  21. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2007), Stakeholders‟ Satisfaction Using Six-Sigma Metrics in a Health Service Unit, “Management Systems and Workers Participation in Globalised Economy” – the Proceedings of the 5th Indian Congress on Quality, Environment, Energy and Safety Management System, JU, at New Delhi, Scope Complex, 2007, Quality 1-9.
  22. Hui Na Tha, Sadhan Kumar Ghosh, (2011). The status of pollution and abilities reused solid waste in trade villages processes agricultural products” in Duong Lieu commune, Hoai Duc, Ha noi, 2nd IconSWM 2011 , Proceedings of International Conf on SWM, Jadavpur University Campus, Nov 5-7, 2011.
  23. Arup Ranjan Mukherjee, Sadhan Kumar Ghosh, (2005), Reducing Welding Rework and Rejection of Recoilless (RCL) Cartridge Cases Applying Taguchi Methods, Proceedings of the Fourth Indian Congress on Quality, Environment, Energy and Safety Management System, ICQESMS 2005, JU, Volume – I, QMS 1-6.
  24. Sadhan Kumar Ghosh, Ardhendu Bhattacharya (1995). Tribological characteristics of metals and plastics in Cryogenic temperature, Tribilogy Conference, Tribiology Society of India, New Delhi 1995.
  25. Siddhartha Sengupta, Sadhan Kumar Ghosh, Rajendra narayan Banerjee (1986). Characteristics of Vibration in stepper motors driven drive system of a lathe, Proceedings of the 5h AIMTDR Conf, Delhi IIT, 1986.
  26. Sadhan Kumar Ghosh, Ardhendu Bhattacharya (1984). Study of Tribological characteristics of metals in vacuum, Proceedings of the 4th AIMTDR Conf, Madras IIT, 1984.

POSTER PRESENTATIONS

  1. Biswajit Debnath, Aryama Raychaudhuri, Sadhan Kumar Ghosh, “Hydrogen Generation from Biorefinery Waste Streams: Recent Trends and Advancements”; Asia-Pacific Conference on Biotechnology Waste Conversion 2016, pp. 213, Hong Kong Baptist University, Hong Kong SAR, P.R. China, 5-8th December, 2016.
  2. Biswajit Debnath, Aryama Raychaudhuri, Sadhan Kumar Ghosh, “Sustainability of Hydrogen generation from Biomass and waste from Biorefineries”; ICT/BIO Asia workshop 2016, University of Malaya, Malaysia, 30-31th May, 2016.